Tag Archives: Athearn

Kitbashing an HO Southern 1960s Bay Window Caboose – Part 2

By | | ,
Leave a comment
Southern bay window cab 22

In Part 1 of this 4-part series, I showed the modifications required for the body, windows, and steps. In part 2, I’ll dive into the roofs, bay windows, and underbody.

Roofs

  • Pressed panel roof (option 1). The “two-bulge” roof panel seems to have been less popular than the smooth roof, but I found at least a few examples that made me want to model it. As mentioned in part 1, this is a tough roof to find, and the only example I had from a Milwaukee Road horizontal rib boxcar kit was too wide. I decided it wouldn’t be too tough to model from styrene bits. From part 1, the roof was already smooth except for the panel … Read more →

Kitbashing an HO Southern 1960s Bay Window Caboose – Part 1

By | | ,
Leave a comment
Southern '60s era HO bay window caboose

Some railroads are blessed to have fairly accurate plastic caboose models, but unfortunately, the Southern Railway is not one of them. In HO scale, the choices are brass, a nice but complicated (and hard to find) resin kit, and a pretty substantial kitbash from a plastic kit. In this 4-part series, I’ll show you the steps to get a credible and fairly accurate model from an Athearn bay window kit. Warning, this project is not for the faint-of-heart! In fact, I think these are the most challenging models I’ve ever built (and I’ve scratchbuilt some cars and done major locomotive kitbashes). Even if you don’t go all-out, you can pick the steps that are most important to you, and while … Read more →

Upgrading an Atlas Trainman Coal Hopper

By | | ,
Leave a comment
Upgrading Atlas Trainman Hopper - Finished

These days, you can find some really nice, super-detailed, ready-to-run HO scale coal hoppers from the likes of Tangent, Kadee, ExactRail, and others. While these models are beautiful, creating an entire coal train can really break the bank, and there are just some hopper prototypes that are only modeled in a lower level of detail. In either case, it’s not too difficult to bring these cheaper plastic kits closer to the detail level of a more expensive brand, and it doesn’t have to be super time-consuming. One of my favorite starting points is the relatively cheap and readily available “Atlas Trainman” ready-to-run hoppers, especially the 9-panel, 70-ton car that’s pretty close to the Southern’s 70-ton fleet I model. There’s a … Read more →